怎样打开华为交换机端口配置命令
交换机是无法直接配IP的你能配vlan的虚拟IPsys 进入系统模式下vlan 2 创建一个vlanport 1\\\/0\\\/24 把24口加入这个vlan 就是interface vlan—interface 进入vlanip add 1.1.1.1 24 配IP这样vlan2 的ip地址就属于24接口了
怎么打开交换机端口
1.交换机的端口是自动开启的，2.路由器的端口是要进入到接口下 使用 no shutdown 命令开启的3.对于三层交换机以太口来说要转换成路由端口的话 可以进入端口 使用 no switchport
华为交换机强制成千兆的命令
进入端口视图然后speed 1000不过有些端口是没有这个命令的，比如XFP的万兆端口，以及所有的100M端口
怎么打开交换机端口
1.交换机的端口是自动开启的，2.路由器的端口是要进入到接口下 使用 no shutdown 命令开启的3.对于三层交换机以太口来说要转换成路由端口的话 可以进入端口 使用 no switchport
在交换机中查看端口速率的命令是什么 华为的交换机
display interface GigabitEthernet1\\\/1 GigabitEthernet1\\\/1 current state : UP IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e214-aa69 Description: to_GGSN3-S1-P1(Gi) The Maximum Transmit Unit is 1500 Media type is optical fiber, loopback not set Port hardware type is 1000_BASE_SX_MMF 1000Mbps-speed mode, full-duplex mode Link speed type is force link, link duplex type is force link Flow-control is not supportedThe Maximum Frame Length is 1536 Allow jumbo frame to pass PVID: 30 Port link-type: access Tagged VLAN ID : none Untagged VLAN ID : 30 Last 5 minutes output: 1037 packets\\\/sec 477064 bytes\\\/sec Last 5 minutes input: 916 packets\\\/sec 372706 bytes\\\/sec input: 2143716912 packets, 812336171573 bytes 931 broadcasts, 0 multicasts input: 0 input errors, 0 runts, 0 giants, 0 throttles, 0 CRC 0 frame, - overruns, - aborts, - ignored, - parity errors Output: 2360109251 packets, 1094809872937 bytes 4561 broadcasts, 42144 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures - aborts, 0 deferred, 0 collisions, 0 late collisions - lost carrier, - no carrier
在交换机中查看端口速率的命令是什么 华为的交换机
display interface GigabitEthernet1\\\/1 GigabitEthernet1\\\/1 current state : UP IP Sending Frames' Format is PKTFMT_ETHNT_2, Hardware address is 000f-e214-aa69 Description: to_GGSN3-S1-P1(Gi) The Maximum Transmit Unit is 1500 Media type is optical fiber, loopback not set Port hardware type is 1000_BASE_SX_MMF 1000Mbps-speed mode, full-duplex mode Link speed type is force link, link duplex type is force link Flow-control is not supportedThe Maximum Frame Length is 1536 Allow jumbo frame to pass PVID: 30 Port link-type: access Tagged VLAN ID : none Untagged VLAN ID : 30 Last 5 minutes output: 1037 packets\\\/sec 477064 bytes\\\/sec Last 5 minutes input: 916 packets\\\/sec 372706 bytes\\\/sec input: 2143716912 packets, 812336171573 bytes 931 broadcasts, 0 multicasts input: 0 input errors, 0 runts, 0 giants, 0 throttles, 0 CRC 0 frame, - overruns, - aborts, - ignored, - parity errors Output: 2360109251 packets, 1094809872937 bytes 4561 broadcasts, 42144 multicasts, 0 pauses Output: 0 output errors, - underruns, - buffer failures - aborts, 0 deferred, 0 collisions, 0 late collisions - lost carrier, - no carrier
