我想要一篇英文的演讲稿2-3分钟的，题目是travel by train in China
With an enormous population like the one you find in China, it is to be expected that the country has an extensive and well-run circuit of trains available to the masses. And this is true – China rail travel is usually a breeze, the trains run on time and the coverage network includes just about anywhere you want to go. Whether a short trip between neighboring towns or a long jaunt across the countryside, there are a few things you should keep in mind when attempting train travel in China. The most important aspect of Chain rail travel, as in many countries, is what class of ticket you are purchasing. Since little to no English (or any other foreign language, for that matter) is spoken, it is wise to pay close attention to what you are buying. China train travel is notorious for having a large variation in cleanliness and comfort between the different classes, and for being impossible to use over festival or holiday periods. Most visitors go and buy the ticket themselves, which can be a time-consuming event. Special China rail travel passes can also be purchased ahead of time, though your reservations are sometimes only for the train, and you will have to purchase another ticket to reserve an actual seat. Train Travel in China has four different travel classes. Hard Seat is the most common and cheapest way to travel, though you will find few foreigners here. The greatest numbers of Chinese travellers use this class, and more tickets than seats are sold so only the very quick are assured a seat. But what it lacks in comfort it makes up for in discounted price – just be sure you are ready to make the trade. Soft Seat is a better way to travel and most of the time you can reserve a seat. They are a far cry from the hard seats – comfortable and you won't have to fight the crowds to get your own. These are the best for city to city or fairly short distance train travel in China. Hard Sleeper are for long journeys, and not for the novice traveler. The definition of the word “cramped” will never be the same for you after sharing the tiny quarters with five others – six bunks to a room, and they are often noisy and look as if whoever was hired to clean them committed suicide due to the impossibility of the task. But you get a threadbare blanket and pillow for your travels, so that's nice. With a Soft Sleeper you upgrade to a room with an actual door. Not to mention a fairly decent bed, though you are usually on your own for food. This is the preferred way for many to experience China rail travel.
我是刚刚小升初一的学生，有没有班长演讲稿
?
相当班长啊
急求一篇”in the year 2056”演讲稿急
3分钟之内的，本科水平
Editor's Note: In celebration of AJM's 50th anniversary, we're not only reflecting on the past, but also looking ahead to the next 50 years of technology, tools, and innovations. Each issue in 2006 will feature predictions of how various aspects of jewelry manufacturing will change and develop in the next half-century. Perspectives on Retail in 50 YearsBY GREG STOPKA The two keys to the success of small, independent jewelers in the next 50 years are embracing technology and focusing on design. In the year 2056, retail stores and their inventory will shrink dramatically. Operating in a 300 to 500 square foot space, the retailer will no longer display actual product inventory in a showcase; they will offer virtual inventory in the form of lifelike renderings of jewelry on store walls, monitors, or plasma screens. The most exciting part of this new sales environment will be the customer's ability to interact with these virtual jewelry pieces. By putting on a set of goggles and a glove, the customer will be able to try on rings in virtual reality, twirling her hand around to see how the piece will look on her finger.Unique designs will be essential to draw the customers into the store. With the growth of the Internet, consumers will have their pick of millions of generic engagement rings online; the only way to get them into your store will be through customization and design. Despite the continued evolution of technology, there will always be a need for that personal connection and relationship. The one-on-one experience a customer gets when you design a ring just for her will still be paramount in 2056. Perspectives on The Jeweler's Shop in 50 YearsBY MICHAEL DAVID STURLIN I hold a firm expectation that much of our present (and ancient) technology will still be an integral part of the year 2056 jeweler’s studio. Our traditional steel tools will still be in use, and there will continue to be a need for hammers and punches, bezel and swage blocks, rolling mills, draw plates, files, gravers, chisels, and jewelers’ saws. Many of these accoutrements have been around for thousands of years, and I think another 50 won’t make them obsolete. It will still be necessary to drill holes in metal and cut seats for stones with burs, so we’ll probably still be using the flex-shaft, albeit a more modern version with enhanced features; however, this tool will provide the same basic function that it does today. Most important, the key to productivity in the year 2056 jeweler’s studio will still be the jeweler—the skilled artisan who works with tools in hand and does not surrender the entirety of the process to mechanization and computerization. A handmade item of jewelry will be just as relevant then as it is now, perhaps to a smaller audience, but I am confident that not all adornments will be automated and manufactured. There will still be an appreciation for the craft—the art—of unique, handmade jewelry.Perspectives on Sales and Marketing in 50 YearsBY JEFF TARASCHI By 2008, 40 percent of all televisions will offer the capability for consumers to purchase items they see on TV shopping networks without picking up the telephone. By simply pressing a button on the remote control, the viewer will be able to charge the purchase to their credit card. Imagine how this process will evolve over the next 50 years…You are watching “Desperate Housewives” and the turquoise earrings Eva Longoria is wearing come up for sale. While you are viewing the program, you simply point and shoot your remote control to buy the earrings. Product placement will have a whole new meaning in 2056.In addition to television sales, Internet sales will skyrocket. The Internet will evolve beyond its current boundaries as rich media supported by broadband delivers TV-style high-definition communication into the home, office, or mobile device. This new dynamic will simplify the process by which brands not linked to traditional brick-and-mortar retail establish viability with multimedia consumers. In the jewelry industry, there will be a surge in personalized shopping and lifestyle marketing. For example, the 40- to 50-year-old upper-income female self-purchaser will have Web sites dedicated to her interests and shopping needs. These sites will have targeted information on fashion trends, colors, styles of the season, popular gems and metals, and must-have jewelry items. Video demonstrations will bring the Internet shopping experience to life. The way to make this new form of marketing financially viable will be to find a loyal group of customers and maximize sales with them. Marketers will need to make consumers comfortable to buy without the requirement of touching the product; their faith in the brand will be critical.There is no doubt that Internet capability will become an essential element for all businesses. Retailers and manufacturers who do not find a way to participate will be negatively impacted or perhaps eliminated.Perspectives on Automation in 50 YearsBY AJIT MENON If high-volume U.S. jewelry manufacturers wish to keep up with overseas competition over the next 50 years, they should seriously consider making automation a part of their manufacturing processes. Mass producers in the United States have been struggling for years to keep up with overseas companies that pay their workers a fraction of the wages that are standard in America. The only way to create a uniform playing field for jewelry manufacturing is to take labor out of the equation—and the only way to do that is through automation.I believe that the year 2056 will see widespread automation in the most labor-intensive part of high volume jewelry manufacturing—finishing. Currently, there is a robot available (R-100 from Superior Robotics Inc.,) that can be programmed to mimic the actual hand movements involved in the manual processes of grinding and finishing. Priced around $125,000, it functions in an enclosed cabinet that measures approximately 3 feet wide by 6 feet high by 3 feet deep, and is suitable for use on a variety of ring styles.In 50 years, advances in technology should shrink the size and cost of this robot, and enhance its capabilities. A tabletop unit that can be programmed to perform any handwork needed on a variety of complex jewelry pieces is the robot of the future. Perspectives on Benchwork in 50 YearsBY BLAINE LEWIS One of the most difficult challenges in bench work is training your eyes and hands to work on a micro scale. Most jewelry pieces are so small that it is almost impossible to see every detail. Students new to the craft struggle with this every day. But with advances in viewing technology, their struggles could be a thing of the past in 50 years.Consider the viewing lenses available now for those who suffer from macular degeneration (an eye disease caused by the deterioration of the part of the retina that is responsible for focusing central vision), who can see something in focus only if it is a few inches in front of their eyes. If you are standing five feet away from someone with this chronic eye disease, they see only a blurry shape; they can't even tell who you are. There are glasses available now that feature LCD technology. Lenses in the glasses project the image they see onto a tiny LCD screen that is right in front of the person's eyes, enabling them to see clearly. Take that same concept and apply it to the bench worker. Imagine being able to put on a pair of jewelry goggles that will enable you to see the piece you are working on in incredible detail. The goggles will have high power zoomable lenses that are capable of high resolution and magnification. And the best part about it is that they will feature voice-controlled lenses that will move and zoom anywhere you command them to—without ever having to take your hands off the workpiece. They will increase your efficiency, reduce eyestrain, and, most important, improve quality. The glasses will enable you to obtain such high standards of quality under high power magnification that to the customer's eye, the piece will be flawless.BY GREGG TODD One of the most significant developments in the jewelry industry in 2056 will be the regeneration laser. Using state-of-the-art ion laser technology, this machine reconstitutes atomized elemental materials suspended in magnetospheric plasma, rebuilding worn or missing surfaces. A boon to moderate- and large-scale jewelry repair and service centers, the laser can polish and repair nearly every jewelry component. Unlike the old-fashioned depletive polishing techniques, which remove material from the surface, the regeneration laser replaces the surface material to produce an atomic level polish of 375 angstroms. A pattern-replication model will be able to scan existing patterns and replace missing structure in a fraction of the time it would take with traditional techniques. This will be a tremendous boost to those who perform chain repair.Of course, the impact on the gem industry will be no less revolutionary. Since the regeneration laser works throughout the full atomic spectrum, it can correct defects in nearly all gem species, including diamond, quickly and easily. Chips, fractures, inclusions, and even wear-damage (abrasions) can be corrected without having to go through the laborious process of re-cutting the gemstone. Even more notable is the fact that this can all be done without removing the stone from the mounting. And best of all, the prongs holding the stone in place can be regenerated at the same time. BY CHARLES LEWTON-BRAIN In the year 2056, all the hand skill techniques used today will be present and valued. Traditional jewelry making technologies—lost-wax casting, for example—will still be in use. However, there will be some amazing new developments, as well.There will be a holographic 3-D digital construction system in which the user wears a virtual-reality visor and constructs a model in mid-air. He or she can pluck component parts and tools from libraries that float in the air around the construction area. These libraries and digital tools are arranged around the object in space for easiest access and speed of building, much as a tangible bench is organized today. The resulting object can then be printed on a rapid prototype machine, which will be ubiquitous in 2056.The machines will build models with materials that burn out easily during the casting process, as well as directly in metal. But the power of virtual reality doesn't stop in the shop. The jewelry consumer will have the option to don virtual reality glasses and see a jewelry design on their finger or around their neck before having it made. They will look into a mirror that virtually applies the jewelry, or CAD rendering, on their skin as they view. This is the future of retail jewelry sales and CAD working in tandem. Aside from the ways it will be made and sold, jewelry itself will be more than a luxury item. Bracelets and necklaces will serve as interfaces for medical monitoring and treatment, as well as computer interfaces.Some additional predictions for the tools you'll see in 50 years include:• Reciprocating gravers with no cords, wires, bulky handles, or air supplies will be wirelessly powered and provide unbeatable control. Similar tools will be available for hammer-setting functions. • A pen-like tool that uses focused vibration will flow metal where it touches a surface, tightening prongs, sealing pits, and aiding setting.• Polishing will be done by intelligent media; miniaturized abrasive-wielding nanobots will crawl over the piece and finish its surface details.• Intelligent job envelopes will automatically input all the jeweler's notes into the corresponding work file.• A desktop identification system, which functions much like a scanning electron microscope, will analyze the atomic makeup of a piece of jewelry, revealing the karatage and naming the precise alloy—a necessity in a world with dozens of complex commercial jewelry alloys. This tool will be able to identify gemstones, as well.
急需要一关于人物的英语演讲稿不要很长.谁有啊,谢拉!
He was a big man,dressed all in grey,with an iron chain on his leg. His clothes were wet and torn. He looked exhausted,and hungry,and very fierce. I had never been so frightened in my whole life.他身材高大，穿一身灰色的衣服，腿上着一副脚镣。
他的衣服湿淋淋的并且破烂不堪，看上去筋疲力尽、饥寒交迫、十分凶残的样子，在我一生中从没有见过如此可怕的人。
谁能帮我找下关于Hillary clinton的人物介绍的英语演讲稿
He was a big man,dressed all in grey,with an iron chain on his leg.His clothes were wet and torn.He looked exhausted,and hungry,and very fierce.I had never been so frightened in my whole life.
双语口语大赛演讲稿中国梦
Innovation Hello, ladies and gentlemen. It’s great to be here. First of all, thanks for your coming. Tonight, what I am gonna talk about is innovation. Who can tell me what is innovation? We all know that, since 1978, China has been through the greatest changes brought by the reform and opening-up. So what we can see from the reform and opening-up? The power of innovation. That’s why I am here. I am here to show you my Chinese dream. I want to talk about the future and how we're going to win it. If we want to make innovation. But firstly, we should make sure that China is a place where we can make it if we try, where we can go as far as hard work and big dreams will take us. We understand that it’s not going to be a cakewalk, this competition for the future, which means all of us are going to have to do our best. We are going to have to win the future by being smarter and working harder and working together. Innovation is the spirit of our country, the motive force for our country’s prosperity. Sparking the imagination and creativity of our people, unleashing new discoveries -- that's what China will do better than any other country on Earth. From the moment we have a new idea, we can explore it; we can develop it with a research grant; we can protect it with a patent; we can market it with a loan to start a new business. We’ve got a chain that takes a great idea all the way through. We must be confirmed that, today, the challenges we face are real. They are serious they are many. They will not be met easily or in a short span of time. But we will somehow find a way to overcome the difficulties. My major is XXX. My job is to discover or create new drugs for many diseases like cancer. You know that laboratory is the place where miracles happen. Believe it or not. What I do can save millions of people’s lives. For a long time, what challenges me is how to commercialize research. You come up with a great idea, but moving that new discovery from theory to practice or f
急求一篇关于“音乐”的英文演讲稿（资料，片段也行）
为什么人们会喜欢“听歌”
而且又为什么，大部分人看某个电影，看完一次后就不想看第二次，然而对于“音乐”，他们却会“一遍又一遍”的听“很久很久”
这里面包含了什么秘密吗
●这是因为客观世界中“物体”可以发出各种“声音”，而这些物体又与我们的“切身利益”和“安全”紧密相关；于是那些“物体”的各种“声音”也“危害与利益”等联系到了一起，而我们的“喜怒哀乐”又是与事物对我们的“危害与利益”相关联的，那么当我们听到类似的“声音”时，就会产生“情绪”上的变化（相当于条件反射\\\/链化反应）；同理，各种“声音”也可以引发各种“思考”。
●所以：既然“音乐”可以帮助我们“加强情绪”和“思考”各种事物，那么我们自然会喜欢它。
●对于“电影”来讲，人们更多的是看“情节”，并吸取里面的“经验”，但一旦看完了，也就一般不会有兴趣看第二遍了；而对于“音乐”来讲，人们是要通过“音乐”来感受各种“情绪”或“思考”各种“问题”，所以自然就会“反复”的“倾听”了。
还有一种原因就是没有事情做，听音乐打法无聊的时间。
◆所以可以依此推理出： 1.人们在悲伤、烦恼时最喜欢一些伤感音乐，从而扩大自己相对应的情感，而这些情感又会产生一些解决问题的【动力】（就像恐惧时，产生很大的逃跑动力；慈母超常动力救子一样），进而解决相对应的问题。
2.人们在思绪凌乱、烦躁不安时会喜欢听一些平静的轻音乐，从而引发各种“平静”和“调理顺畅”的感觉和情绪，进而有于利于理智的解决问题和维持心理的健康。
3.人们在愉快、有激情的时候，会喜欢听一些欢快、动感的音乐。
4.喜欢思考一些奇怪\\\/特别事物的人，就会听比较另类的音乐。
5.各种电影片段配上相对应的音乐，创造出各种相对应的情绪氛围，会让我们看起来更有感觉。
◆使用【全集然文明】逻辑：自然万物都有引导它们存在的东西，我们简称为“导存”；人类的“思想意识”属于“二次导存”（第二次引导事物存在的东西）；而人类的“情感”又是“二次导存”中“特级指示”，来引导我们朝着“可以更好存在”的方向发展；而“音乐”可以给予人们各种“特级指示”的“重现”，并帮助人们思考问题，于是出现了“正向特示”（正方向的特级指示，就是喜欢和乐趣等好的感觉）。
Why do people like songs? And why, most people watching a movie, read once, do not want to see a second time, but for music, they will over and over again, listening long, long time? That which contains anything secret? ● This is because the objective world of objects can be issued all kinds of voice, and these objects also with our vital interests and security are closely related; so those objects of the various voices also harm and interests linked to together, and our emotions is something right with our harm and benefit associated with, then when we heard a similar voice , they will have a mood on the change (the equivalent of a conditioned reflex \\\/ chain reaction); Similarly, the various voices can also lead to a variety of thinking. ● So: Since the Music can help us to strengthen the emotional and thinking various things, then we would naturally like it. ● For the movie is concerned, it is more of a look at plot, and lessons inside the experience, but once read, and thus are generally not interested in watching a second time; As for the music to speaking, people are to make music to experience all kinds of emotional or thinking various issues, so naturally, repeatedly and listen to the. Another reason is that things are going to do, listening to music, play boring time. ◆ so it can be so out of reasoning: 1. People in grief, trouble, when some sentimental favorite music, and thus expand their corresponding emotions, and these feelings will be created to solve the problem】 【power (like fears, have a huge motivation to escape; chamo supernormal Power to save the child does), then solve the corresponding problem. 2. People scattered thoughts, irritability would like to listen to some calm light music, giving rise to all kinds of calm and Conditioning smooth feeling and emotions, and thus there was conducive to rational problem-solving and maintaining mental health. 3. People happy and full of passion that it will like to listen to some cheerful, dynamic music. 4. Like to think of some strange \\\/ special things people would listen to more alternative music. 5. A variety of film clips accompanied by corresponding music, creating all kinds of emotions corresponding to the atmosphere, will enable us to look even more sense. ◆ the use of natural and civilized 【Collection】 logic: in nature there is something there to guide them, we are referred to as guided deposit; human ideology are secondary lead deposit (Second lead to the existence of something) ; and a human emotion is secondary lead deposit in a super instructions to guide us towards a better presence in the direction of development; and music can give people a variety of super instructions and to revive and help people think about the problem, so emergence of the special show positive (positive direction of the super instruction is love and fun, good feelings, etc.).
